Simpson Strong Tie SD #9 x 2-1/2" Connector Screw (100-Pack) SD9212R100-R

Simpson Strong-Tie

SD #9 x 2-1/2 Connector Screw 100 ct. SD9212R100-R

The Strong-Drive SD Connector screw is specifically designed to replace nails in certain Simpson Strong-Tie connectors and is the only screw approved for that application. The load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie products.

FEATURES:

• Specifically designed to replace nails in certain Simpson Strong-Tie connectors and is the only screw approved for that application. The #9 and #10 SD screws replace 10d and 16d nails; respectively.
• Tested and approved for use in many of our most popular connectors for both interior and exterior applications.
• Ideal for use in connector applications where more control is desired or using a hammer is inconvenient.
• 1/4" hex head with 0.37"-dia. integrated washer is stamped with the Simpson Strong-Tie "?" sign and the fastener size for easy identification after installation.
• Shank is specifically designed to match the fastener holes in Simpson Strong-Tie connectors.
• Optimized heat treating for ductility and strength.
• The single-fastener load capacity of the SD9 exceeds the capacity of a 10d common nail; while the single-fastener load capacity of the SD10 exceeds that of the 16d common nail.
• Hex driver included.

SPECIFICATIONS:

Coating/Material	Mechanically Galvanized; Class 55
Screw Size	#9
Length (in.)	2-1/2"
Drive Type	1/4" (Hex)
Head Type	Hex Head
Thread Type	Serrated Threads
Point Type	Sharp Point