Spyder 9pc Tarantula Carbide Tipped, Metal Cutting Hole Saw Set 600925

Spyder

9pc Tarantula Carbide Tipped, Metal Cutting Hole Saw Set 600925

Spyder's carbide tipped Tarantula cuts the toughest materials - steel, stainless steel, nail embedded wood, cement fiber board, and more. Durable tungsten carbide cutting teeth make up to 50x more cuts than conventional bi-metal hole saws, and they are up to 10x faster. Use Spyder's Rapid Core Eject arbor system to remove cores without prying - drill hole, press button, pull back the hole saw, and eject the core. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Spyder hole saws fit on Spyder Rapid Core Eject arbor/pilot bits, and on universal hole saw arbors.

FEATURES:

• 50 More cuts and 10x faster than standard bi-metal hole saws.
  
• Spyder's Rapid Core Eject arbor removes cores without prying, cuts at an angle, and enlarges existing holes.
  
• Cuts steel, stainless steel, nail embedded wood, plastics, non-ferrous metals, cement fiber board and more.
  
• Tungsten carbide tipped hole saws for extended life, clean cuts and extreme material drilling versatility.
  
• Creates smooth cuts in steel, stainless steel, aluminum, nail embedded wood, non-ferrous metal, cement fiber board, plastics/PVC and more.
  
• Eject the core, enlarge holes and cut at an angle using Spyder's Rapid Core Eject arbor and pilot bits.
  
• Universal 1/2-20 thread hole saws use Spyder Hex8 arbor/pilot bits and 5/8-18 thread hole saws use Spyder Hex10 arbor/pilot bits. 2-3/8-in depth of cut.
  
• Not for use in hammer mode. Always use a drill motor with a support handle.

INCLUDES:

(1) 1" Hole Saw

(1) 1-1/8" Hole Saw

(1) 1-3/8" Hole Saw

(1) 1-1/2" Hole Saw

(1) 2" Hole Saw

(1) Hex8 Pilot

(1) HSS Pilot

(1) Hex10 Pilot

(1) HSS Pilot

(1) Hex8 Arbor

(1) Hex10 Arbor