Simpson Strong-Tie Drop in Anchors 303 Stainless Steel 1/2" Rod Size (PACK 50) DIA50SS
$248.69
Ready to Order This item is not in stock but could be available with the manufacturer. Expect 4-12+ days for delivery depending on the manufacturer and their availability.
OPT SKU
SSTDIA50SS
- Simpson Strong-Tie
- Drop in Anchors 303 Stainless Steel 1/2 Rod Size (PACK 50) DIA50SS
- Drop-In anchors are internally threaded drop-in expansion anchors for use in flush-mount applications in solid base materials. Available in stainless steel (DIA); short (DIAS) or coil-thread (DIAC) versions. Minimum thread engagement should be equal to the nominal diameter of the threaded insert.
- Installation
- Drill a hole in the base material using the appropriate diameter carbide drill bit as specified in the table. Drill the hole to the specified embedment depth plus 1/8" for flush mounting. Blow the hole clean using compressed air. Overhead installations need not be blown clean.
- Insert designated anchor into hole. Tap with hammer until flush against surface.
- Using the designated drop-in setting tool; drive expander plug toward the bottom of the anchor until shoulder of setting tool makes contact with the top of the anchor.
- Minimum thread engagement should be equal to the nominal diameter of the threaded insert.
Country of Origin | Taiwan |
---|---|
Width | 0.631 in. |
Depth | 0.631 in. |
Height | 2.02 in. |
OPT SKU | SSTDIA50SS |
---|---|
MPN | DIA50SS |
UPC/GTIN | 044315479106 |
Product Type | Drop-in Anchors |
Google Category | Hardware > Hardware Accessories > Hardware Fasteners |
Condition | NewCondition |
Weight | 0.12 |