Enerpac 10' Thermo-Plastic High Pressure Hydraulic Hose HC7210
$354.00
Special Order Estimated Shipping in 5-12 Days - Once Item(s) Received
OPT SKU
ENP-HC7210
Similar Products
Enerpac Split Flow Hydraulic Manifold with Gauges and Frame For Single-Acting Cylinders SFM41 $9,564.00
SKU: ENP-SFM41
Enerpac
10' Thermo-Plastic High Pressure Hydraulic Hose HC7210
This Enerpac HC7210 hydraulic hose is for use with high-pressure applications such as hydraulic jacks and has a maximum working pressure of 10;000 (pounds per square inch) psi. It is 10' in length; with a polyurethane outer jacket for resistance to abrasion and two layers of steel wire braids for strength and resistance to expansion.
FEATURES:
- Crimped-on rubber strain relief for improved life and durability on all models.
- For demanding applications; featuring a 4:1 design factor.
- Maximum working pressure of 10;000 psi.
- Two layers of steel wire braids.
- Outside jacket is polyurethane; to provide maximum abrasion resistance.
- Exhibits low volumetric expansion under pressure to enhance overall system efficiency.
SPECIFICATIONS:
| Maximum Operating Pressure (psi) | 10;000 |
|---|---|
| Internal Diameter (in) | 0.25 |
| End One Coupler | 3/8 NPTF |
| End Two Coupler | CH604 |
| Oil Capacity (in3) | 5.89 |
| Hose Oil Capacity (in3) | When using long hose lengths; it is sometimes necessary to fill the pump reservoir after filling the hoses. To determine the hose oil capacity; use the following for .25" internal diameter hoses: Capacity (in3) = .5892 x Length (ft) |
| Length | 10 |
| Shipping Weight | 2.95 lbs |
|---|---|
| End Two Assembly | CH604 |
| Product Line | Industrial Tools |
| Type | Hose |
| internal Diameter | 6,4 mm | 0.25 in |
| Weight | 3.3 lbs | 1,5 kgs |
| End Two Coupler | CH604 |
| Hose Oil Capacity | When using greater hose lengths, it is sometimes necessary to fill the pump reservoir after filling the hoses. To determine the hose oil capacity, use the following for 6,4 mm inside diameter hoses: Capacity (cm3) = 32,1699 x Length (m) cm³ | When using long hose lengths, it is sometimes necessary to fill the pump reservoir after filling the hoses. To determine the hose oil capacity, use the following for .25" internal diameter hoses: Capacity (in3) = .5892 x Length (ft) in³ |
| News Feed Product Group | Hoses, Pumps |
| Length | 10 ft |
| Capacity | 96,51 cm³ |
| End One Coupler | 3/8" NPTF |
| Length m | 3,0 |
| Country of Origin | Germany |
| Sub Types | Thermo-plastic Hose |
| Oil Capacity | 5.89 in³ |
| End One Assembly | 3/8" NPTF |
| OPT SKU | ENP-HC7210 |
|---|---|
| MPN | HC7210 |
| UPC/GTIN | 662005203079 |
| Product Type | Hydraulic Components & Fittings |
| Shipping Weight | 3.50 |
Related Products
Check items to add to the cart or
