0 Item(s) In Cart

Simpson Strong-Tie ET-HP Epoxy Anchoring Adhesive 22 oz. ET-HP22

Product Information

  • Simpson Strong Tie
  • ET-HP Epoxy Anchoring Adhesive 22 oz. ET-HP22
  • ET-HP® is a two-component, high-solids, epoxy-based system for use as a high-strength, non-shrink anchor-grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. ET-HP® is formulated for anchoring threaded rod and rebar into concrete (cracked/uncracked) and masonry.
  • Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads
  • Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-3372
  • Code listed under the IBC/IRC for masonry per IAPMO UES ER-241
  • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
  • Cure times: 24 hours at 70°F, 72 hours at 50°F
  • Easy hole-cleaning – no power-brushing required
  • Suitable for use in dry or water-saturated concrete
  • When properly mixed, adhesive will be a uniform gray color
  • Available in 22 oz. and 56 oz. cartridges for application versatility
  • Manufactured in the USA using global materials
  • Product Includes: ET-HP22-N – One EMN22i mixing nozzle and one nozzle extension are supplied with each cartridge.
  • Color: Resin – white, hardener – black. When properly mixed, ET-HP adhesive will be a uniform medium gray color.
  • Shelf Life: 24 months from date of manufacture in unopened container
  • Applications: 
    • Highway / DOT
    • Brick: Solid
    • Concrete Block: Grouted
    • Brick: Unreinforced (URM)
    • Concrete Block: Hollow (Ungrouted)
    • Concrete: Cracked
    • Brick: Hollow
    • Threaded rod anchoring and rebar doweling into concrete and unreinforced masonry
    • Suitable for horizontal, vertical and overhead applications
    • Multiple DOT listings
  • Installation: 
    • Surfaces to receive epoxy must be clean.
    • Base material temperature must be 50°F or above at the time of installation. For best results, material should be 70°–80°F at time of application.
    • To warm cold material, store cartridges in a warm, uniformly heated area or storage container. Do not immerse cartridges in water to facilitate warming.
    • Mixed material in nozzle can harden in 30 minutes at temperatures of 70°F and above.

Condition: New

Manufacturer: Simpson Strong-Tie Adhesive Anchors

Simpson Strong-Tie ET-HP Epoxy Anchoring Adhesive 22 oz. ET-HP22

SSTET-HP22

LIST PRICE: $65.33

On Sale For: $22.87

Shipping Weight:2.50 lbs

Shipping Estimator
Shipping Estimate:
Loading...