0 Item(s) In Cart

Dustless Wet/Dry Vacuum 16 Gallon 16003

Product Information

  • Dustless Wet/Dry Vacuum, Model 16003 - If all you need is something to suck Fritos and Cheetos off the floorboard of your pickup truck, buy a typical shop vacuum. But if you're looking for protection from harmful airborne dust created from diamond tools or drywall sanding, or if you're looking for ways to save time and money and increase productivity, look no further than the Dustless Wet/Dry Vacuum.
  • Outperforms Traditional Shop Vacuums - Dust from diamond tools and drywall sanding is extremely fine, like talcum powder, and the tiniest particles (the dangerous ones) blow right through the filter of a typical shop vacuum. When traditional shop vacuums are fitted with baffles, or supplemental filters, for removing finer dust, they can clog up quickly. Airflow is restricted and the vac's ability to pull the dangerous dust out of the air is reduced. The Dustless Wet/Dry Vacuum solves all these problems.
  • Two Layers of Filtration for a Dust-Free Jobsite - With the Dustless Wet/Dry Vacuum, you won't have to worry about your wet/dry vac leaving a layer of fine dust or coughing out airborne particles when you turn it on. Designed to handle extra-fine dust from concrete, stone, fiberglass, drywall, and more, the 16003 works with a patented two-filter system to effectively collect and keep the dust in the vacuum where it belongs.
  • Clean Filters Without the Mess - The primary filter can be cleaned without opening the vacuum and allowing dust to escape into the air. Simply shake the agitator rod to dislodge debris and dust, and you can get right back to vacuuming. Both the primary and secondary filters are made out of machine-washable, synthetic fabric, so you'll never have to buy replacement filter bags for this vacuum.
  • Micro Pre-Filter is Economical and Efficient - The ultimate in filtration is a HEPA filter, which captures airborne particles down to 0.3 microns. Dustless has a certified HEPA version of the Wet/Dry Vacuum, but if you want to save money, and you don't have to use a certified HEPA vacuum to meet OSHA, EPA or NIOSH guidelines, an economical alternative is to use the 16003 Wet/Dry Vacuum with an optional Micro Pre-Filter, which is available at one-tenth of the price of a HEPA filter. As efficient as it is economical, the optional Micro Pre-Filter captures particles down to a half a micron—that's 0.0025”, the width of a human hair. And because it can be a challenge to prevent clogs in such a fine filter, Dustless Technologies has made the Micro Pre-Filter oversized to give it more surface area—no other vacuum does the same. In fact, the wet/dry vac will maintain suction power with up to 40 pounds of dust—the Micro Pre-Filter itself can hold up to 80 pounds of dust.
  • Vacuums Liquids Without Hassle - Unlike other wet/dry vacuums, the Dustless Wet/Dry Vacuum allows you to go from dry to wet vacuuming without stopping to change the filters. When water is captured by the vacuum, it drains down the interior wall of the tank, away from the filters—a check ball prevents the water from rising up to the filters or motor.
  • Quiet and Powerful with Convenient Tool Storage - The Wet/Dry Vacuum emits only 81 decibels of noise and has a powerful motor that produces 23,000 RPM. This means you'll get maximum, consistent suction, even as the vacuum contains 40 lbs of dust and debris. For further convenience, the 16003 wet/dry vacuum comes with a full set of tools that store right on the unit.
  • What's in the Box - Dustless Wet/Dry Vacuum, five-piece tool set including one 12-foot hose, one 14-inch-wide floor tool, one 1.5-inch crevice tool, and two 19-inch extension wands. For added convenience, the vacuum features on-board tool storage.

Condition: New

Manufacturer: Dustless Technologies

Dustless Wet/Dry Vacuum 16 Gallon 16003


LIST PRICE: $349.95

On Sale For: $299.94

Shipping Weight:80.00 lbs

Shipping Estimator
Shipping Estimate: