0 Item(s) In Cart

Shop By Brand

1" D.O.C. RotaLoc Plus Annular Cutters

Hougen RotaLoc Plus 1" D.O.C.  Pilot 17470 Hougen RotaLoc Plus 1" D.O.C. Cutter 1-1/4" 17240 Hougen RotaLoc Plus 1" D.O.C. Cutter 7/16" 17214 Hougen RotaLoc Plus 1" D.O.C. Cutter 1/2" 17216 Hougen RotaLoc Plus 1" D.O.C. Cutter 9/16" 17218 Hougen RotaLoc Plus 1" D.O.C. Cutter 5/8" 17220 Hougen RotaLoc Plus 1" D.O.C. Cutter 11/16" 17222 Hougen RotaLoc Plus 1" D.O.C. Cutter 3/4" 17224 Hougen RotaLoc Plus 1" D.O.C. Cutter 13/16" 17226 Hougen RotaLoc Plus 1" D.O.C. Cutter 7/8" 17228 Hougen RotaLoc Plus 1" D.O.C. Cutter 15/16" 17230 Hougen RotaLoc Plus 1" D.O.C. Cutter 1" 17232 Hougen RotaLoc Plus 1" D.O.C. Cutter 1-1/16" 17234 Hougen RotaLoc Plus 1" D.O.C. Cutter 1-1/8" 17236 Hougen RotaLoc Plus 1" D.O.C. Cutter 1-3/16" 17238 Hougen RotaLoc Plus 1" D.O.C. Cutter 1-5/16" 17242 Hougen RotaLoc Plus 1" D.O.C. Cutter 1-3/8" 17244

1" D.O.C. RotaLoc Plus Annular Cutters

Hougen
17,000 Series 1" D.O.C. Depth of Cut RotaLoc Plus Annular Cutter
For use exclusively in the HMD150 magnetic drill
Bayonet-style twist lock shank for faster cutter changes without using tools
Up to three times the cutting speed of twist drills and traditional tooling like twist drills, along with a longer tool life, a more accurate hole, and a better, burr-free finish
Made of hardened, high speed tool steel and precision ground to an exact outside diameter
Two flats for cutter mounting make for a rigid connection to you mag drill and offers twice to tool life when compared to quick change or one touch tool mounting systems
Only a thin are of material touches the outside of the hole, which provides for less friction and a better hole finish
Hougen-Edge tool geometry provides faster, smoother cuts with less chatter
A relief are between the slug and the cutter reduces horsepower required and improves slug ejection
Ground and fully fluted bits provide better chip evacuation, requires less HP and offers better performance in deeper holes
Hougen has been making Rotabroach cutters since they invented them in 1974 and still makes them today, right here in the USA
Most RotaLoc cutters can be resharpened, some up to 15 times depending on depth of cut and tool wear