0 Item(s) In Cart

Shop By Brand

2" D.O.C. Copperhead Carbide Cutters

Hougen 2" D.O.C.  Pilot for Copperhead Cutters 10530 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 9/16" 18218 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 11/16" 18222 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 13/16" 18226 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 7/8" 18228 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 15/16" 18230 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 1" 18232 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 1-1/16" 18234 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 1-1/8" 18236 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 1-3/16" 18238 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 1-1/4" 18240 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 1-5/16" 18242 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 1-3/8" 18244 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 1-1/2" 18248 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 1-5/8" 18252 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 1-3/4" 18256 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 1-7/8" 18260 Hougen 2" D.O.C. Copperhead Carbide Tip Cutter 2" 18264

2" D.O.C. Copperhead Carbide Cutters

Hougen
18,000 Series 2" Depth of Cut Carbide Copperhead Annular Cutter
Copperhead Carbide Tip Cutters feature a durable grade carbide insert for extended tool life when used with Hougen Mag Drills on abrasive and tough-to-cut materials.
Up to three times the cutting speed of twist drills and traditional tooling like twist drills, along with a longer tool life, a more accurate hole, and a better, burr-free finish
For use with Hougen Portable Magnetic Drills that require 3/4" Weldon shank
Two flats for cutter mounting make for a rigid connection to you mag drill and offers twice to tool life when compared to quick change or one touch tool mounting systems
Only a thin are of material touches the outside of the hole, which provides for less friction and a better hole finish
Hougen-Edge tool geometry provides faster, smoother cuts with less chatter
A relief are between the slug and the cutter reduces horsepower required and improves slug ejection
Ground and fully fluted bits provide better chip evacuation, requires less HP and offers better performance in deeper holes
Hougen has been making Rotabroach cutters since they invented them in 1974 and still makes them today, right here in the USA
Most Rotabroach cutters can be resharpened, some up to 15 times depending on depth of cut and tool wear