Hougen Tools Standard HMD904 Fabricator's Kit 904105
$1,507.00
In-Stock Ships Quickly According to Your Carrier Selection
OPT SKU
HOU0904105
FREE SHIPPING @ 199+
Standard Ground (Lower 48 States)
Standard Ground (Lower 48 States)
Similar Products
- (1) Carrying Case
- (1) Pint of Coolant
- (1) Safety Chain
- Hex Wrenches
- (1) 1/2" Drill Chuck
- (1) Adapter
- (1) "12,000-Series" Cutter Kit
All the same great features of the HMD904 with an added layer of safety and even more versatility. The permanent magnet easily operates with an on/off knob and grips to the steel without the need for electricity. Plus the unique structure of the magnet allows it to be used for pipe drilling without an adapter. The HMD904 can use all the same accessories as the other HMD904’s and is made in the USA. The Permanent Magnet HMD904 is built upon the same platform that fabricator’s around the world know and trust. The permanent magnet requires no electricity to operate and turns on and off with an easy to rotate knob. The drill includes a pilot work light for dim conditions and many other features of the standard HMD904. The unique structure of the magnet footprint allows for pipe drilling without an adapter.
- Large 1-1/2″ x 2″ capacity
- Hidden motor cord
- Ergonomic housing
- Increased safety with less maintenance
- Pilot light
- Two stage magnet – 30% power increase when motor is turned on
- Positive slug ejection
- Slot Drive arbor for more accuracy and quicker change out of accessories
- Many accessories are available for a portable machine shop including: drill chucks, tapping, countersink, and more…
- Feed handles quickly change from side to side
- Lift detector safety system
- Rear mounted controls
- Gravity feed coolant system (HMD904 w/ coolant bottle)
- Carrying case included (09202)
- Two year warranty
| ELECTRICAL SYSTEM | 115V, 50/60 Hz - 9A, 1035W; 230V, 50/60 Hz - 4.5A, 1035W |
|---|---|
| MOTOR | 8A (115V), 4 (230V), 450 RPM |
| DIAMETER | 7/16"- 1-1/2" (12mm - 38mm) |
| DEPTH | 2" (50mm) |
| CUTTER | "12,000-Series" & Copperhead™ Carbide cutters, 3/4" shank |
| WEIGHT | 30 lb. (13.6 kg) |
| SHIPPING WEIGHT | 44.1 lb (20 kg) |
| DIMENSIONS | 18" H x 7-3/4" W x 11-5/8" L; (457mm H x 197mm W x 295mm L) |
| SHIPPING DIMENSIONS | 18 x 20 x 9" (45.72 x 50.8 x 22.9 cm) |
| MAGNET | BASE: 3-1/8" W x 6-9/16" L (79mm W x 167mm L); DEAD LIFT: (1" / 25mm Plate): 1750 lb. (794 kg); DEAD LIFT: (3/8" / 9.5mm Plate): 1310 lb. (594 kg); DRILL POINT BREAKAWAY: (1" / 25mm Plate): 995 lb. (452 kg); DRILL POINT BREAKAWAY: (3/8" / 9.5mm Plate): 710 lb. (322 kg) |
| OPT SKU | HOU0904105 |
|---|---|
| MPN | 904105 |
| UPC/GTIN | 662850000137 |
| Product Type | Mag Drills |
| Google Category | Hardware > Tools > Drills > Handheld Power Drills |
| Diameter | 7/16" |
| Depth of Cut | 2" |
| Package | Kit/Set |
| Planner ID | S |
| Shipping Weight | 44.10 |
Recommended Mag Drill Accessories
You Might Like This Better
Fein JME Holemaker III Magnetic Drill Endurance Slugger (1-3/8" Diameter, 2" DOC) 72705961090 $1,149.95
FEIN-72705961090
DeWalt 20V Max XR Cordless Jigsaw w/ 20V MAX* XR Brushless Cordless Compact Router w/ 20V MAX 5.0Ah Battery 2-Pack Starter Kit
KIT-DW-DCS334B-DW-DCW600B-DW-DCB205-2C
Was $787.00
$299.00
Fein JHM USA 101 Magnetic Drill Endurance Slugger (1-1/2" Diameter, 2" DOC) 72725261124 $1,399.95
FEIN-72725261124
Fein JMC MAGFORCE 90 Compact Magnetic Drill Slugger (1-3/8" Diameter, 1-3/8" DOC) 72732362090
FEIN-72732362090
Was $1,579.95
$1,399.95
CS Unitec Ultra Compact Magnetic Drill (1-1/2" Diameter, 1-1/2" DOC) MAB 155PRO $1,215.00
CSMAB 155PRO
