Fluke 1AC II E1 VoltAlert Electrical Tester 1AC-A1-II

In-Stock Now!


1AC II E1 VoltAlert Electrical Tester

The next generation VoltAlert AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip; outlet; or supply cord. When the tip glows red and the unit beeps; you know there's voltage present. Electricians; maintenance; service; safety personnel; and homeowners can quickly test for energized circuits in the workplace or at home.


  • Voltbeat technology and continuous self-test – so you always know it's working.
  • Upon detection; tip glows and beeper sounds.
  • CAT IV 1000 V for added protection.
  • Expanded range: 200 V AC to 1000 V AC.
  • 20 V to 90 V AC control circuit model also available.
  • Two-year warranty.
  • Batteries included.
  • On/Off Button.
  • Audible/Silent.


    Operating principlesSenses the steady state electrostatic ?eld produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
    Voltage sensing rangesNominally; 200 V AC to 1000 V AC
    Detector tip styleRound-tip
    Light sourceOne high intensity red LED
    Agency approvalsc CSA us; CE; C-Tick
    Safety rating1000 V; CAT IV
    Safety complianceMeets IEC 61010-1:2001; UL 61010-1 (2nd ed.); CAN/CSA-C22.2 No. 61010-1-04; and ISA-82.02.01 Pollution Degree 2
    EMC complianceMeets IEC 61326-1:2006
    IP RatingIP 40
    Operating temperature-10°C to 50°C (-14°F to 122°F)
    Operating humidity ranges0% to 95% (0°C to 30°C)
    0% to 75% (30°C to 40°C)
    0% to 45% (40 to 55°C)
    Operating altitude3000 m
    CleaningClean with damp cloth
    Batteries2 AAA alkaline batteries included
    Battery lifeTypical battery life of greater than 1 year
    Warranty periodTwo years
    Product does not respond to random electrostatic discharge.
More Information
UPC/GTIN 095969290784
Shipping Weight 2.00