Diamond Products Core Cut 60" Concrete Saw 74HP Kubota Diesel CC9074DK-60 Walk-Behind 59724
$56,989.19
Ready to Order This item is not in stock but could be available with the manufacturer. Expect 4-12+ days for delivery depending on the manufacturer and their availability.
OPT SKU
DP59724
Similar Products
Diamond Products Core Cut 26" Concrete Saw 25HP Kohler Command CC2525KC-26 Gas Walk-Behind 78816 $13,082.39
SKU: DP78816
Diamond Products
74 HP 60 Walk Behind Saw CC9074DK-60
FEATURES:
- Certified EPA/CARB Tier 4 engine
- Advanced digital 7 display
- Smart 3 mode display screen for blade speed; engine speed; engine torqueviews
- Critical diagnostics functions alerts potential problems to avoid shutdown
- Blade over-speed alert
- Engine service alerts and maintenance reminders
- USB Port for quick simple updating of display software
- Digital depth indicator/stop
- Front View Camera to view sawing location/obstructions
- LED spot and bar lights for night sawing
- Adjustable blade lowering speed
- Central water control valve
- Auto Water System (AWS) automatically starts/stops water to blade when in/out of cut
- Quick set handle bars
- On-board handle bar storage
- Convenient battery access for easy charging access
- Single piece frame platform with heavy bar and tubular reinforcement
- Undercarriage slurry flap to minimize slurry buildup on rear axle components
- Tubular frame lift -central hoist location for balanced even lifting
- Effective weight balance for balanced optimum performance
- Fast attach blade guard stabilizer with quick disconnect ball joints to speedguard removal
- Steady hydrostatic pump for smooth reliable response with low speed travelcreep
- Heavy duty wheels with1 thick polyurethane tread for front and rear wheels
- Easy-turn 5th wheel that automatically lifts rear wheels at max raise height toallow rear saw swivel
- Enclosed rear wheel motors that are hydraulic driven with center swivel foreasy tracking adjustment
- Simple freewheeling with dash mounted switch activation
- Robust blade shaft with massive support by 3 pillow block style; sphericalroller bearings
- Powerful Jackshaft drive with low speed; high torque blade drive maximizingfull engine power
- Vast 25 depth sawing with an impressive 60 blade and 10 quick disconnectflanges
- Advanced air cleaner with radial seal primary and secondary filters along withspinner style pre-cleaner
- Reliable radiator fan drive with gear driven clutch drive for strong coolingperformance
- Front mounted radiator with front saw access for quick cleaning and servicing
- Robust radiator core made of heavy duty aluminum that withstands frequentpower washing
- Heavy rear weight kit with improved traction for the deepest sawing
- Sealed electronic protection that resists heat; moisture; shock and vibration
- Corrosion resistant components with durable finish for harsh demandingconditions
CC9074DK Control PanelDetailed control instructions and computer readout for blade speed and engine setting.The control panel can automatically fold down to protect the screen.
SPECIFICATIONS:
| Saw Model | CC9074DK-60 |
|---|---|
| Blade Guard Capacity | 60 (1500mm) |
| Blade Cutting Depth Max. | 25 |
| Blade Shaft Speed | 800 RPM |
| Jackshaft Sheave Size | 8 |
| Engine Speed | 2;400 RPM |
| Blade Flange Size | 10 OD |
| Drive Belts (Set of 10) | 3VX650K |
| Operating Weight | 2;773 lbs. |
| Crated Weight | 2;964 lbs. |
| Blade Guard Weight Only | 200 lbs. |
| Rear Weight Kit Only | 200 lbs. |
| Engine Model | Kubota V3307-CR-TE4B; EPA Carb Tier 4 Final/ EU Stage III B |
| Engine Type | 4 cylinder; liquid cooled; turbo diesel |
| Engine Max. Power | 74.3 hp @ 2600 rpm (Kubota rating) |
| Emission Regulation | EPA-CARB Tier 4 Final / EU Stage III B |
| Engine Air Filtration | Dry dual element with spinner pre-cleaner and restriction indicator |
| Engine Sheave Size | 4 (All Models) |
| Peak Torque | 195.5 Ft-Lbs (265 Nm) @ 1500 rpm |
| Battery | 12 Volt (950 CCA) group size 31 |
| Starter / Alternator | Electric 4hp (3kW) / 90 Amp |
| Blade Arbor Size | 1 diameter with drive pin |
| Blade Flange Type | Quick disconnect |
| Blade Shaft | 1-3/4 OD with left/right side mounting; 3 pillow blocks with spherical roller bearings |
| Blade Shaft Drive | Engine: 10 Kevlar V-Belts (3VX) to Jackshaft: 20 Kevlar V-Belts (3VX) |
| Blade Coolant | Dual stainless steel multi-jet spray tubes |
| Blade Raise & Lower | Electro-hydraulic power unit with push button control |
| Blade Lowering Speed | Adjustable panel mounted flow control valve |
| Blade Depth Control | Electronic depth indicator and depth stop |
| Front Wheels | 8 x 3 with 1 poly tread (sealed ball bearings) |
| Axle Size (Front/Rear) | Front: 1 OD straight / Rear: 1 OD tapered |
| Rear Wheels | 10 x 3 with 1 poly tread (quick disconnect lug nuts) |
| Fifth Wheel | 3-1/4 x 2 poly tread swivel lock caster |
| Travel Speed | 0-220 FPM (2.5 mph) forward/reverse |
| Rear Wheel Transmission | Hydrostatic pump with push/pull cable control |
| Rear Wheel Drive | Hydraulic wheel motors with freewheel for pushing |
| Parking Brake | Automatic hydraulic lock at stop position |
| Handle Bar Adjustment | Variable extension with quick lock variable 30 angle range |
| Safety Alerts | Emergency stop; blade overspeed; neutral startCC9074DK |
| Standard Features:Telescoping front and rear pointers; dual LED marker lamps; fuel and oil coolers; low coolant level sensor; oil drain valve; air restriction indicator; travel speed push/pull cable; positive front axle depth stop; slip-on blade flange guard; folding foot rest; polycarbonate decals; ratcheting blade shaft wrench. | |
| OPT SKU | DP59724 |
|---|---|
| MPN | DP5801294 |
| UPC/GTIN | 603461597241 |
| Product Type | Concrete & Masonry Saws |
| Google Category | Hardware > Tools > Saws > Masonry & Tile Saws |
| Condition | NewCondition |
| Weight | 1,999.00 |
Related Products
Check items to add to the cart or
