CS Unitec Eibenstock 8" Diamond Core Drill w/ Anchor Stand & Vacuum Pump ETN 162/3 PSV

CS Unitec

8 Wet/Dry Diamond Core Drill w/ Anchor Stand & Vacuum Pump ETN 162/3 PSV

Model ETN 162/3 P is a versatile Wet or Dry Diamond Core Drill with a Water Swivel and Dust Extraction Port built directly into the spindle. It easily connects to a vacuum for dust extraction. The drill stand mount allows the operator to switch from hand-held to stand-mounted drilling quickly.

FEATURES:

• Holes up to 8" diameter hand-held dry drilling in masonry; brick and block.
• Hand-held wet drilling up to 3-1/4" diameter in concrete.
• Rig-mounted drilling up to 6-3/8" diameter in concrete.
• Mechanical Slip Clutch Design.
• 19.5 Amps and 3 mechanical speeds.
• Ideal for plumbing; mechanical and electrical construction; as well as civil engineering and landscape construction.
• Wet drilling in reinforced concrete; natural stone and asphalt.
• Dry drilling in limestone; brick; block and other abrasive materials.

SPECIFICATIONS:

Power input	19.5 Amp
Rated Voltage	110 V
Load Speeds (RPM)	0-510 / 0-1150 / 0-2500
Drilling Diameter	Wet: 1/2" to 6-3/8" Dry: 1/2" to 8"
Spindle Connection	1-1/4"x7 UNC 5/8"x11 UNC
Collar Length	39-1/4"
Supplied	ETN 162/3 + BST 162 V + vacuum pump (P/N 253 511)without drill bit