Makita 1-3/4" AVT SDS-Max Rotary Hammer HR4510C

$879.00
Backorder This item is currently on order and have been notified it will take to receive than normal. Placing an order will secure your place in line and we would typically anticipate 5-15+ days delay for Back Ordered items to get fulfilled but longer waits certainly happen all the time on popular items. Please do not hesitate to call our sales team with questions or stock status.
OPT SKU
MAKHR4510C

Makita

1-3/4 AVT SDS-MAX Rotary Hammer HR4510C

FEATURES:

  • Anti-Vibration Technology for 2X Less Vibration
  • Powerful 13.5 AMP motor delivers 9.2 ft-lbs. of impact energy to handle the most demanding applications
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for increased accuracy
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
  • L.E.D. power lights indicate switch failure or cord damage
  • Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
  • Extended life brushes are longer for more work between service intervals and less downtime
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for Hammering Only or Hammering with Rotation for multiple applications
  • 16 bit angle settings allow the bit to be set at different positions for operating convenience
  • One-touch sliding chuck for quick bit changes
  • Lock-on switch for continuous operation (Hammering Only mode)
  • Rubberized ergonomic soft grip provides added comfort
  • Makita Motor Advantage engineered with field core interlocking steel laminations; dual ball bearing armature and more copper commutator bars; increasing energy transfer efficiency for more power and longer tool life

Specifications:

    AMPS13.5
    Capacity (concrete drilling)1-3/4"
    Capacity (concrete drilling w/ core bit)5"
    Impact Energy (Joules)12.5 J
    Impact Energy (ft-lbs.)9.2 ft-lbs.
    Vibration (m/s)9.5
    Blows Per Minute (variable speed)1;250 - 2;750 BPM
    No Load Speed (variable speed)130 - 280 RPM
    Overall Length18"
    Cord Length (ft)16.4'
    Net Weight19.6 lbs.
    Shipping Weight35 lbs.
    Bit TypeAccepts SDS-MAX

INCLUDES:

  • (1) Side Handle (151769-0)
  • (1) D-handle (417003-1)
  • (1) Depth Gauge (321248-4)
  • (1) Hammer Bit Grease (194683-7)
  • (1) Plastic Tool Case (158275-6)
"
More Information
SKU MAKHR4510C
UPC/GTIN 088381084994
Shipping Weight 35.00
Shank SDS-MAX
MAKHR4510C (450.67 kB)