Klein Parallel Jaw Grip-Lock; HDPE Wire to 1.362-Inch 1716-71
$592.82
Direct Ship*
Item will ship direct from manufacturer if meets minimal requirements or from Ohio Power Tool, whichever is faster typically these orders will take 2-5+ days to ship if available from manufacturer. We do work to update customers if long delays are expected. Please do not hesitate to call our sales team with questions or stock status.
OPT SKU
KLN-1716-71
Klein
Parallel Jaw Grip-Lock; HDPE Wire to 1.362-Inch 1716-71
This parallel jaw grip was specifically designed to securely pull slippery HDPE-coated cable or tree wire. The innovative high-traction surface grips the cable without damaging the outer jacket.
FEATURES:
- Locking handle keeps jaw open while using hot stick to place grip on cable.
- Pulls cable diameters 0.625-Inch to 1.362-Inches (15.9 to 35.0 mm).
- 4;000-Pound maximum safe load.
- Tough carbide grit technology withstands even the harshest jobsite conditions.
- Spring-loaded for one-handed operation and easy placement on the conductor.
- Common tree wire cable types include general cable; Hendrix aerial systems; rite lite BLL conductor and Southwire S2 covered cable.
SPECIFICATIONS:
Type | Parallel Jaw Grip |
---|---|
Application | Wire Pulling |
Special Features | High Traction Grip Surface; Lock |
Overall Length | 13.05 |
Overall Height | 8.5" |
Overall Width | 6.975" |
Material | Forged Steel |
Cable Type | HDPE-Coated |
Cable Diameter | 0.625" to 1.362" |
Jaw Type | Round |
Jaw Length | 4.5" |
Maximum Safe Load | 4;000 lb |
Standard | OSHA |
Weight | 5.10 lb |
*WARNINGS:*
- Before each use; clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines; ground; insulate; or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation; not for permanent anchorage.
Overall Height | 8.5" (21.6 cm) |
---|---|
Material | Forged Steel |
Spring | Yes |
Item Weight | 5.0750 lbs |
Jaw Length | 4.5" (11.4 cm) |
Jaw Type | Round |
Maximum Safe Load | 4000 lb (1814 kg) |
Cable Diameter | 0.625" to 1.362" (15.9 to 34.6 mm) |
Application | Wire Pulling |
Type | Parallel Jaw Grip |
Locking Handle | Yes |
Item Width | 6.9750 in |
Standard | OSHA |
Overall Width | 6.975" (7 cm) |
Hot Latch | Yes |
Cable Type | HDPE-Coated |
Weight | 5.10 lb (2.3 kg) |
Accessories | 25450 |
Item Height | 2.9250 in |
Overall Length | 13.05" (17.7 cm) |
Item Depth | 13.0500 in |
Swing Latch | No |
OPT SKU | KLN-1716-71 |
---|---|
MPN | 1716-71 |
UPC/GTIN | 092644470653 |
Product Type | Wire & Web Pullers |
Google Category | Business & Industrial > Material Handling > Lifts & Hoists |
Condition | NewCondition |
Weight | 5.10 |