Ohio Power Tool - Milwaukee Thick Wall Core Bits (SELECT SIZE)

Milwaukee Thick Wall Core Bits (SELECT SIZE)

E-mail this product to a friend

Milwaukee
Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-3/8 inch. The inside core must be removed by the operator before deeper drilling can be accomplished. The Thick Wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 inch extension is available to allow for the deeper holes to be drilled. The appropriate (dependant on the diameter) SDS Plus Drive Shank must be used to drive the Core Bit. Use 48-20-6155 Center Pin and 48-20-6156 Guide Plate for positioning and starting the hole.
SELECT SIZES BELOW

Base Price: $0.00
Customized Price: $0.00

Please select the available options below.

Options with an (*) are required.
Once you have filled in all the required options and pressed the Update Options button you will be able to add this item into your shopping cart.


Milwaukee Thin Wall Core Bits (SELECT SIZE)	Diamond Products Core Bore 7/8" - 6" Dry Core Bit (SELECT SIZE)	Diamond Products Core Bore Heavy Duty Orange 1" - 24" Wet Core Bits (SELECT SIZE)	Milwaukee Steel Hawg Carbide Tipped Cutters (SELECT SIZE & PILOT)


Milwaukee Spline Drive Thick Wall Core Bit Shank 48-03-3564	Milwaukee Spline Hammer Drill Bits (SELECT SIZE)	Milwaukee Spline Drive Hammer Chisels (SELECT SIZE)

*Thick Wall Core Bits
48-20-5135 2", Add $140.07
48-20-5140 2-1/2", Add $165.83
48-20-5145 3", Add $200.62
48-20-5150 3-1/2", Add $226.31
48-20-5155 4", Add $253.61
48-20-5160 5", Add $302.05
48-20-5165 6", Add $377.72
48-20-6155 CENTER PIN, Add $25.60
48-20-6156 GUIDE PLATE, Add $5.70