RIDGID Model 258 Power Pipe Cutter 50767

Ridgid

Model 258 Power Pipe Cutter

The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 (65 mm) to 8" (200 mm) schedule 10*/40 steel pipe; galvanized pipe; rigid conduit; etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive; the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21 ft (6m) or nipple lengths of pipe is achieved quickly** without abrasive dust; sparks; or open flame. Also; the RIDGID Pipe Roller for beveling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe.

FEATURES:

• Square cut 21ft (6m) or nipple lengths of pipe without effort.
• Easily cuts by displacing instead of removing pipe material.
• No abrasive dust; dangerous sparks; or open flame.
• Quickly cuts steel pipe with minimal burr.
• Great for cutting pipe for groove joining.
• Heavy-duty design is perfect for field or shop use.
• Adaptable for beveling.

SPECIFICATIONS:

Cutting Capacity	2 1/2" (65 mm) to 8" (200 mm) schedule 10*/40 steel pipe

*Powered by a model 700 Power Drive (not included). Power Drive RPM 26-30 (no load)*